Site Loader

Electrician’s just pull wire and connect switches to lights and outlets are what several people think. Before being able to work on their own electrical contracting business, the job of an electrician actually requires thousands of hours of experience and hundreds of hours of specialized training and education.

When it comes to certifying electricians as journeyman or master electricians, each state is different. Under direct supervision of a journeyman or master electrician as an electrical apprentice, some states require several thousand hours of specific work. The local jurisdictions or municipalities are on whom licensing is left on completely.

As with the other trades, emergency Northern Beaches electricianrequires a lion’s share of general use and specialty tools. Let’s take a closer look at the top 5 types of tools that professional electricians customarily use on the job and should be in every electrician’s tool belt.


One of the most crucial equipment that every electrician should possess is the flashlight. It is the best thing to carry in certain situations that might require some additional light to help you witness this even if you are not assigned to the site where the flashlight will not be required.

Outlets, sockets, wire boxes, conduits, and pipe are always dark on the inside. Even if the area you are working in has abundant light, you should never try to work inside tiny places or reach inside panels without proper light. Because electricians work with and carry a lot of equipment, many flashlights that electricians carry are lightweight, sturdy, yet provide a bright beam of light.


Voltmeters are yet another valuable piece of equipment that electricians utilize to not only work efficiently but also to work safely. To measure the potential electrical difference that is there between two certain points in an electric circuit are the Voltmeters. An electrician should never assume the circuit that needs to be worked on doesn’t have electricity flowing through them. With a voltmeter, an electrician can test the circuits and see if they are in fact “live.” Based on the readings made from the voltmeter, the electrician can properly and safely address the circuits and plan the best route to make necessary repairs.

#3.Wire Strippers

A very good pair of wire strippers is also important. Wire strippers are small, hand-held tools, very similar to scissors, which are used to cut the unbound insulation surrounding the wire without actually cutting the wire itself. With the insulation removed and the wire exposed, an electrician can connect those wires to switches, conductors, or anything with requires to run on that electrical circuit.


When it comes to the Plier, they too form the most essential equipment to carry. Pliers can serve many functions for an electrician. Pliers can be used for tightening and loosening, providing much extra needed grip for the electrician, cutting blade for wires, pulling wires through locations, twisting wires, and a myriad of other functions. Pliers are indeed a very important multi-purpose tool for an electrician to have.

#5.Draw Tape

Draw Tape, or draw wire, is also a very important tool and electrician can have. Usually called “fish tape”, draw tape is a tool an electrician would use to route guide string for new wiring through pipes, walls, or electrical conduit.

A long, narrow band of medium-carbon steel that’s coiled placed on a reel is what a draw tape is. Because it’s made of medium-carbon steel, it can conform to the curvatures of different conduits. The draw tape works by attaching one end of guide string to the end of the draw tape.

The draw tape is pushed through the conduit with the guide string attached. Once the draw tape meets the end of the conduit, the wires are tied to the opposite end of the guide sting. By pulling the guide string, this would route the wire through to the end of the conduit.

Areliable electrician Northern Beaches Sydney can acquire a lot of tools that are needed to complete a job over the course of his or her career. There is no doubt that these tools are the top 5 must-have tools of every electrician.

To Conclude

In order to keep and renew their journeyman or master electrician license electricians are also typically required to take continuing education. To ensure that electricians are familiar with current codes, both locally and with the National Electrical Code these licenses are important.

 At least every few years and electrical courses have to keep up electrical codes are updated. There are also courses for electricians to keep them on the cutting edge of technology and offer them more opportunities for work with solar and wind energy gaining in popularity.

Leave a Reply

Your email address will not be published. Required fields are marked *

nineteen − twelve =